138 found, showing page 2 of 4
$13.99
16OZ NOZZLE GEL
Does not clog orifices and threads, eliminates erratic operation. For use on fixtures of semi- and automatic welders. Odorless, non-flammable, non-toxic and silicone free. Will not cause porosity.
View Details
$11.29
1/2LB BRAZING FLUX
For use with all flame torches. Easy clean for solid, dense brazing jobs. Borax type. 1/2 lb. (pound) reusable plastic container.
View Details
$44.99
10LB .030 MIG WIRE
ER 70S-6 mild steel MIG (GMAW) welding wire is a high strength mild steel MIG wire. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirtysteel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Required Shielding Gas: Argon/CO2.
View Details
$79.99
10LB .035 FLUX MIG WIRE
E71T-GS flux core MIG (GMAW) welding wire for mild steel is a self-shielded mild steel all position flux cored MIG welding wire. Best suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel.
View Details
$23.99
18x18" ALUMINUM BRZNG ROD
Braze aluminum and zinc-based metals with an oxy-acetylene or propane torch set-up. No flux needed. Ideal for irrigation pipes, aluminum boats, camper covers, lawn mower housings and casings (including aluminum magnesium). Melting point: 732 F (Degree Fahrenheit). 8 rods per pack.
View Details
$42.99
FIX FRONT HELMET WELDING
The Bandit II welding helmet. Lightweight, durable polymer material. 4-1/2" x 5-1/4" fixed front. Ratchet headgear, clear lens, and #10 shade lens included.
View Details
$19.99
HEAD GEAR WELDING
Replacement ratcheting headgear. For Forney helmet Model No. 55673, 55666, 55684, 55697 and 55699.
View Details
$6.99
2" #8 WELDING LENS
Replacement welding lenses. No. 8 shade can be used for arc welding of 15A (ampere) to 20A. No. 9 shade can be used for arc welding of 20A to 40A, mig welding of 40A to 80A, and plasma cutting of 10A to 15A. No. 10 shade can be used for arc welding of 40A to 80A, mig welding of 80A to 150A, and plasma cutting of 15A to 30A.
View Details
$6.49
2" #9 WELDING LENS
Replacement welding lenses. No. 8 shade can be used for arc welding of 15A (ampere) to 20A. No. 9 shade can be used for arc welding of 20A to 40A, mig welding of 40A to 80A, and plasma cutting of 10A to 15A. No. 10 shade can be used for arc welding of 40A to 80A, mig welding of 80A to 150A, and plasma cutting of 15A to 30A.
View Details
$11.79
4-1/2" WELDING LENS
Replacement welding lenses. No. 8 shade can be used for arc welding of 15A (ampere) to 20A. No. 9 shade can be used for arc welding of 20A to 40A, mig welding of 40A to 80A, and plasma cutting of 10A to 15A. No. 10 shade can be used for arc welding of 40A to 80A, mig welding of 80A to 150A, and plasma cutting of 15A to 30A.
View Details
$9.79
4-1/2" WELDING LENS
Clear plastic cover lenses offer protection from dust, weld spatter, and impact.
View Details
$10.99
TIP MIG CONTCT.030
Precision machined contact tips. Fits Forney 304, 306 and 308 MIG welders and Tweco, Binzel and Clarke MIG guns.
View Details
$10.99
1" .035MIG CONTACT TIP
Precision machined contact tips. Fits Forney 304, 306 and 308 MIG welders and Tweco, Binzel and Clarke MIG guns.
View Details
$21.99
DIAMOND BURR POINTS
Diamond Point Set, 20-piece set with assorted shapes and sizes of nickel bonded diamond points. 1/8 In. shank. Excellent for deburring, etching and smoothing of glass, plastic, ceramics and metals. Maximum RPM 30,000. Sizes 61 to 80.
View Details
$22.99
*DRILL BIT SET 20pc
Includes 20 common numbered mini drill bits, sizes 61-80. For precision drilling of wood, plastic and metal. 30,000 max RPM (revolutions per minute). Convenient steel index storage case.
View Details
$4.89
FLAT SOAPSTONE 5" 3-PACK
Flat soapstone used for marking and outlining welds. 3 per pack. 3/16" x 1/2" x 5".
View Details
$15.99
PICK SET
4-way pick repair kit includes four 6" steel picks: Retriever pick, O-ring remover, 90 deg (degree) pick, and straight pick/scribe.
View Details
$11.79
*MAGNET HOLDER***********
Strong non-switchable magnetic support jig sticks to any iron object. Includes 45 Deg., 90 Deg. and 135 Deg. angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
View Details
$14.99
MAGNET HOLDER
Strong non-switchable magnetic support jig sticks to any iron object. Includes 45 Deg., 90 Deg. and 135 Deg. angles. Excellent "3rd hand" for welding, soldering, assembly, pipe installation, marking, floating and separating thin metal stacks.
View Details
$7.49
SOAPSTONE HOLDER
Ruggedly constructed flat steel soapstone holder comes with a channel case design and convenient spring pocket clip. Easily indexable and smooth operating - designed for one-handed operation. To adjust soapstone length, press brass trigger with thumb and index to the next positive stop. Fewer working parts and more usable soapstone. Widely used in the welding industry.
View Details
$24.99
PLIER WELDING
Needle nose pliers ideal for various welding applications. Needle nose pliers grip for pulling. Small serrated hole for mig tips. Flat surfaces for hammering. Cutter to trim mig wire. Large serrated hole for nozzle. Spring-loaded handle. Heavy insulated comfort-grip.
View Details
$8.99
TRIPLE FLINT STRIKER
Lights torches and welding kits quickly and easily. Rugged frame. 3 large flints. Dependable ignition under all working conditions.
View Details
$7.49
4PK REPLACEMENT FLINT/****
3-way rotating flint. Pack of 4. For Forney triple flint lighter.
View Details
$129.99
5/32 50LB 6013 ELECTRODE
Mild steel "Superweld" is an all-position, general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Small sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct-work, etc.
View Details
$44.99
10# 1/8 7018AC ELECTRODE
AC mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC/DC welders. Suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low allow steel. For frames, trailer hitches and chassis.
View Details
$42.99
10# 1/8 7018 ELECTRODE
Mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC (Alternating Current)/DC (Direct Current) welders. Suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches, and chassis.
View Details
$129.99
1/8 50LB 7018 ELECTRODE
Mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC (Alternating Current)/DC (Direct Current) welders. Suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches, and chassis.
View Details
$27.99
5/32 5LB 7018 ELECTRODE
Mild steel "Low Hydrogen" welding rods easily produce quality results on smaller amperage AC (Alternating Current)/DC (Direct Current) welders. Suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. Reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium, and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches, and chassis.
View Details
$134.99
50# 5/32 6011 ELECTRODE
Mild steel, "Supersixty", all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of strong arc force. Useful for galvanized tanks, steel casting, and pressure pipe.
View Details
$22.99
1LB .035 ALUM MIG WIRE
ER5356 aluminum MIG (GMAW) welding wire features 5\% magnesium content and a bright finish. It flows freely at 1180 F (degrees Fahrenheit) and provides less "bird-nesting" on push-type MIG welders. Applications include diesel engine bases,truck frames, cargo tanks and gun mount bases.
View Details
$25.99
1LB .035 ALUM MIG WIRE
ER4043 aluminum MIG (GMAW) welding wire features 5\% silicon content and a bright finish. Flows freely at 1155 F (Degrees Fahrenheit). Works well with spool guns. For truck bodies, pressure vessels and structural members.
View Details
$54.99
.030 308ER STNL MIG WIRE
ER308 stainless steel MIG (GMAW) welding wire consists of 20\% chromium and 10\% nickel. Welds type 301, 302, 304, 308,321 and 347 stainless steel. Applications include the food and beverage industry, maintenance and repair.
View Details
$139.99
*WELDER ARC 70A 115v
Dual heat setting. Preset for 1/16" or 5/64" welding rods. Thermal overload protection, automatically shuts off to avoid overheating. Built-in storage, keeps accessories organized. Includes: Welding shield, hammer/brush, electrodes, and quick start guide. 115V. 20A input, 50A - 70A AC output. Duty cycle: 10\% at 70A/20\% at 50A. Electrode sizes: 1/16" and 5/64". Welds from 18-gauge to 1/8" steel.
View Details
$8.79
CAST IRON ELECTRODE
"Nomacast" non-machinable cast iron specialty welding electrodes feature a non-conductive coating that is specially developed for welding dirty, heat-affected and oxidized cast iron. Ideally suited to cladding contaminated casting prior to joining with high nickel alloys. Typical applications include machine bases, pedestals, frames and housings where heat and machinability are not an important factor. Hardness: RC 39.
View Details
$31.99
ALUMINUM ELECTRODE
DC aluminum "aluminarc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum. Excellent for cast, wrought and extruded aluminum in all positions. Can also be used as a torch brazing alloy. Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plate, irrigation piping, engine blocks, transmission housings and railroad frogs. Amperage: 70-120
View Details
$9.99
1# 1/8 6011 ELECTRODE
Mild steel, "Supersixty", all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of strong arc force. Useful for galvanized tanks, steel casting, and pressure pipe.
View Details
$9.59
1/8 1LB 6013 ELELCTRODE
Mild steel "Superweld" is an all-position, general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Small sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct-work, etc.
View Details
$9.99
1# 3/32 6011 ELECTRODE
Mild steel, "Supersixty", all-position rod with strong arc force for deep penetration. Fast metal solidification facilitates welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of strong arc force. Useful for galvanized tanks, steel casting, and pressure pipe.
View Details
$25.99
3/32 5LB 6013 ELECTRODE
Mild steel "Superweld" is an all-position, general purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Small sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel where ease of operation and good appearance is required. Great for light gauge metal, sheet metal, duct-work, etc.
View Details
